Referred Journal Publications

    1. "Computer Simulation of the Uniaxial Elastic‑Plastic Behavior of Paper", M. K. Ramasubramanian & R. W. Perkins, ASME Journal of Engineering Materials and Technology, Volume 110, PP 117‑123, April 1988.
    2. "Mechanique des Solids. Measure des Coefficients de Contraction laterale et leur calcul a l' aide d'une Simulation numerique pour un papier fabrique sur machine", Note de B. Castagnede, M. K. Ramasubramanian, and R.W. Perkins.  (Journal) C. R. Acad. Sci.Paris, 306 Serie II, pp 105‑108, 1988.
    3. “Software Implementation of a Design for Life-Cycle Analysis Scheme”, M. K. Ramasubramanian and P. Targos, International Journal of Environmentally Conscious Design and Manufacturing, Vol. 6, No. 1, 1997.
    4. “Shear Strength of an Adhesively Bonded Paper-Metal Interface”, M. K. Ramasubramanian and W. R. Crews. Journal of Pulp and Paper Science (JPPS, Canada), Vol. 24 No. 1, 1998. Pp. 31-36.
    5. "The Transverse Compression of Poly (para-Phenyleneterephthalamide) Fibers 1: Single Fiber Transverse Compression Testing", M. K. Ramasubramanian,  J. N. Singletary  et. al., Journal of Materials Science, 35(3): 573-581, February 2000.
    6. "The Transverse Compression of Poly (para-Phenyleneterephthalamide) Fibers 2: Fiber Transverse Structure", M. K. Ramasubramanian, J. N. Singletary et al., Journal of Materials Science, 35(3): 583-592, February 2000.
    7. "Mechatronic Design and performance of a laboratory creping device", M. K. Ramasubramanian and D. L. Shmagin. J. Manufacturing Sci. & Eng, ASME Transactions, Aug. 2000, 122(3) 576-581.
    8. "Microstructure organization in para-aramid fibers”, M. K. Ramasubramanian, J. Singletary, H. Davis, J. Srinivasarao, W. Knoff, Textile Research J, 2000 Nov., 70(11)945-950.
    9. "An experimental investigation of brim forming in paperboard containers”, M. K. Ramasubramanian and M. D. Swecker. J PULP PAP SCI 27 (4): 113-117 APR 2001.
    10. "A Computational Mechanics Model for the Brim Forming Process in Paperboard Container Manufacturing", with K. Muthuraman (ASME J. of Manufacturing Sci. & Eng.), Vol. 125, pp 476-483,  Aug 2003
    11. “Evolution of Mechatronics into a Graduate Degree Program in the United States-The NC State University Master of Science Program with Mechatronics Concentration” M. K. Ramasubramanian,  M. N. Noori, G. K. F. Lee, Int. J. Eng. Education 19 (4): 519-524 2003.
    12. Ramasubramanian, M.K.; Jackson, S.D. “A Sensor for Measurement of Friction Coefficient on Moving Flexible Surfaces”, IEEE Sensors Journal, Vol. 5, Issue 5, Page(s):  844- 849, October 2005.
    13. Ramasubramanian, M.K.; Venditti, R.A.; Ammineni, C.; Mallapragada, V., “Optical Sensor for Noncontact Measurement of Lignin Content in High-Speed Moving Paper Surfaces”, IEEE Sensors Journal, Vol. 5, Issue 5, Page(s):  1132- 1139, October 2005.
    14. “Adhesion interactions between poly(vinyl alcohol) and Iron Oxide Surfaces: The effect of Acetylation”, Uner, B, Ramasubramanian, M. K., Zauscher, S., and Kadla, J. F. Journal of Applied Polymer Science, Volume 99, Issue 6, Date: 15 March 2006, Pages: 3528-3534
    15. “Focused High Frequency Ultrasonic Removal of Xerographic Toner from Paper Surfaces” with S. Madanshetty, Appita Journal, Vol. 59, No. 4, pp 306-316, July 2006.
    16. “Behavior of Paper on a High-Speed Conveyor Subjected to Air Jet Impingement-A Method for Bending Stifffness Estimation”, M.K Ramasubrmanian, Richard Venditti, and Kalyan C.Katuri, (to appear in of Mechanics of Materials and Structures, 2007, Vol. 2, Issue. 2, pp 201-219.
    17. “A Non-Contact Sensor for the Identification of Paper and Board Samples on a High-Speed Sorting Conveyor”, M. K. Ramasubramanian, Richard A. Venditti and Kalyan C. Katuri (in Press, Appita Journal, September 2007)
    18. "A computational micromechanics constitutive model for the unloading behavior of paper",  M.K. Ramasubramanian and Yun Wang, In Press, Corrected Proof, Available online 10 May 2007, International Journal of Solids and Structures, Elsevier, 2007.
    19. "Intraocular Pressure Monitoring Sensors", Kalyan Katuri, Sanjay Asrani, M. K. Ramasubramanian, IEEE Sensors Journal, (accepted, revision submitted 8/15/2007). to appear in special edition, "In vivo sensors for medicine", 2007.
    20. “A Computational Fluid Dynamics Modeling and Experimental Study of the Mixing Process for the Dispersion of Synthetic Fibers in Wet-Lay Forming”, M. K. Ramasubramanian and Donald Shiffler, (submitted to Journal of Engineered Fibers and Fabrics, 2007).
    21. “Visible/Near-Infrared Spectrophotometric Blood Typing Sensor for Automated Near-Patient Testing”, S. Anthony and M. K. Ramasubramanian (in revision). IEEE Sensors Journal, 2007.
    22. “Mechanics of a Mosquito Bite with Applications to Microneedle Design”, O. M. Barham, V. Swaminathan, M. K. Ramasubramanian (submitted to IOP Journal on Biomimetics and Bioinspiration, 2007).
    23. “Debonding and Buckling of a Thin Film Bonded to a Rigid Surface”, M. K. Ramasubramanian and Z. Sun, (Submitted to J. Mechanics of Materials and Structures, 2007).
    24. “An analytical model for the creping process”, Z. Sun and M. K. Ramasubramanian, (Int. J. Solids and Structures, 2007).
    25. “A Microfluidic Device and Integrated sensing method for detecting RBC agglutionation”, Stewart Alexander and M. K. Ramasubramanian, (Int. J. of Microfluidics and Sensors, 2007).
    26. “Implementation and Evaluation of an electronic towbar for intelligent transportation”, M. K. Ramasubramanian and  Keith Sanders, (Mechatronics Journal 2007)